Commercial Kitchens

Product code

Full details

Designed specifically to tackle the issues of hygiene and durability in a busy kitchen our 3010 channel system is the standard for many specifiers. 

Our standard system includes; a channel with a built-in fall with a gradient designed to be self-cleansing, anti-slip gratings and a trapped gully assembly with waste basket to collect solids before they enter the drainage system and odour trap to prevent smells. With all internal items being removable to allow for full bore access for rodding if required.

As standard the channel can be supplied in any length with the outlet positioned anywhere along the length.

Various options are available to adapt the standard design including channel designs to suit a vinyl floor finish and side outlet gullies.

For further information please call us on 01952 588488

Technical information for Commercial Kitchens

Channel type 3010-300
Grating type 4001
Gully type 5200
Description Stainless steel drainage channel 300mm wide with 250mm wide anti-slip gratings, 23 x 23mm open mesh, 30 x 2mm load bar. System includes built-in fall to type 5200-110VW stainless steel, height adjustable trapped outlet gully with removable waste basket, odour trap, rodding port and 110mm diameter vertical outlet spigot.
Material options Grade 304 or 316 stainless steel
Standard sizes 300mm wide - length of channel and position of outlet to suit site requirements.
Applications Washdown areas typically; food prep stations, pot wash.



We have carefully developed our standard range of channel systems to meet your most common needs, dependant on where and how the channel system will be used.

This takes into consideration the following questions;

  1. What is the floor finish of the area?
  2. What is the amount of wastewater?
  3. What is the type of traffic passing over?


If our standard range doesn't meet your needs we offer an adapt service.

Adapt aims to meet your more specific needs by providing you with ‘adapted’ standard range products in a very short lead time.

Because we manufacture everything in house we have the ability to completely personalise any of the standard range products to your needs.

For example, you may want one of the standard channels to be a little bit longer, or wider. You may need the depth to be deeper. Maybe you need two different floor finishes to meet one channel and therefore a combination of profiles is needed.

Just ask us for more information.


We understand that, although our product range is versatile, there are times when our customers need us to just rip up the templates and begin from scratch and we are more than happy to do so.

If you’re not quite sure what is needed for the job at hand, just give us a call. Our aim is to help guide you through the entire process from design stage to installation and of course the after care.

Just give us a call on 01952 588488


Related Products


Commercial Kitchen - Bratt Pans

Product Details

Compact Channel

Compact Channels

A thin channel that doesn't require any grating

Product Details


Leisure & Showers

Product Details

Food Preparation

Food / Drink Production

Product Details

Related Case Studies

Park Chinois

Challenge: To provide a sustainable, hygienic drainage solution which meets all FDA, hydraulic and design requirements.

Read it

Cafe Royal

Challenge: To offer advice and guidance to specifiers and on-site contractors, whilst supplying the best possible drainage solution.

Read it


Challenge: To design and manufacture a drainage solution, taking into account existing pipework, architectural designs and the necessary hydraulic requirements.

Read it

The Leadenhall Building

Challenge: To design and supply a drainage solution, suitable for vinyl sheet flooring. Whilst meeting all loading, design and flow-rate requirements.

Read it