When being cleaned, certain kitchen equptiment will need to be discharged directly into a channel drain; for this we have designed our 3010-500 channel system specifically to have the capacity for the large volumes of water. Whilst being a wash down point the channel system - when positioned in co-ordination with the tilting element of the equipment will collect the waste water and any drips.
Our standard system includes; a channel with a built-in fall with a gradient designed to be self-cleansing, anti-slip gratings and a trapped gully assembly with waste basket to collect solids before they enter the drainage system and odour trap to prevent smells. With all internal items being removable to allow for full bore access for rodding if required.
As standard the channel can be supplied in any length with the outlet positioned anywhere along the length.
Various options are available to adapt the standard design including channel designs to suit a vinyl floor finish and side outlet gullies.
For further information please call us on 01952 588488
|Description||Stainless steel drainage channel 500mm wide with 450mm wide anti-slip gratings, 23 x 23mm open mesh, 30 x 3mm load bar. System includes built-in fall to type 5300-110VW stainless steel, height adjustable trapped outlet gully with removable waste basket, odour trap, rodding port and 110mm diameter vertical outlet spigot.|
|Material options||Grade 304 or 316 stainless steel|
|Standard sizes||500mm wide - length of channel and position of outlet to suit site requirements.|
|Applications||Typically situated beneath the pouring area of kitchen equipment such as bratt pans and tilting kettles.|